Square Feet to Square Meters Converter

Common sqft to sqm conversions

How this conversion works

1 square foot = 0.09290304 square meters. Multiply square feet by 0.09290304.

Privacy: Conversions run in this browser. Nothing you type is uploaded.

The exact conversion factor

One square meter equals 10.7639 square feet, so converting square feet to square meters divides by that factor: 1,000 sq ft is about 92.9 m². The reverse multiplies by it. This converter uses the precise factor (0.09290304) rather than the common 10.76 approximation, which matters for larger areas and real-estate documents.

Why the unit matters in real estate

Listing sizes differ by market: the US and Canada commonly use square feet; most of the world uses square meters. A 100 m² apartment is about 1,076 sq ft — an important reality check when comparing international listings or reading a floor plan from abroad.

Room-by-room estimation

For irregular layouts, break the space into rectangles, compute each in one unit, then convert the total. Converting the total rather than each room avoids compounding rounding error.

Construction and material implications

Material quotes may be priced per square meter (tile, carpet, paint) even where floor plans are in square feet. Converting the room size to the quote's unit before comparing prices prevents a 10.8x pricing error — the exact mistake this converter exists to prevent.

Quick mental reference

One meter is about 3.28 feet, so a square meter is about 10.76 square feet. For quick estimates, dividing square feet by 10.8 gives square meters within a couple percent — the converter gives the exact number when the estimate is close enough to matter.

What you are converting

Square foot

A unit of area equal to a square measuring one foot on each side, widely used for floor plans and real estate listings in the United States. A standard parking space occupies about 180 square feet.

Square meter

The SI derived unit of area, equal to a square one meter on each side, and the standard for property measurement in most countries. A small single-car garage covers roughly 15 square meters.

Why convert and when you would use this

Homebuyers and renters comparing listings across countries need to translate US-style square footage into metric floor areas, and contractors or interior designers ordering flooring, tiles, or paint from international suppliers must match coverage rates quoted per square meter rather than per square foot.

Worked example

For an apartment advertised at 850 square feet, multiply 850 by 0.09290304 to get 78.967584 square meters. A two-bedroom unit listed at 850 sq ft therefore offers roughly 79 square meters of living space, which makes it directly comparable against metric-listed properties.

Rounding and accuracy

Keep full precision through any calculation chain and round only the final result. Use two decimal places for real estate listings and room dimensions, three to four decimals for construction takeoffs or material estimates, and all six available decimals when engineering accuracy matters more than readability.

Related conversions